Products and Services
Crane System
Overhead Crane
Overhead cranes are the most widely used lifting systems in industrial facilities. Supported by runway beams on both sides of the building, they travel along the length of the structure to provide full coverage of the working area below. Their simple construction, high efficiency, and ability to maximize workspace coverage make them the preferred solution for a wide range of material handling applications.
Gantry Crane
Gantry cranes operate on ground-mounted rails and are supported by freestanding legs instead of the building structure. This design makes them an ideal choice for outdoor operations or facilities where the existing structure cannot support an overhead crane. They provide a reliable and flexible lifting solution for warehouses, fabrication yards, shipyards, and other heavy-duty applications.
Semi Gantry Crane
Semi gantry cranes combine the advantages of overhead and gantry crane systems. One side of the crane is supported by a freestanding leg running on a ground rail, while the opposite side travels on a runway beam attached to the building structure. This configuration is well suited for facilities with large spans where installing a full overhead crane is impractical or when lifting coverage is only required in a specific area. Semi gantry cranes are commonly used for loading and unloading materials from trucks in manufacturing plants and warehouses.
Jib Crane
Jib cranes provide an efficient lifting solution for localized workstations. Equipped with a horizontal boom mounted on a freestanding column or attached directly to an existing wall or structural column, the boom can rotate up to 180° or 360°, depending on the design. They are widely used in workshops, machining areas, assembly lines, and maintenance stations where fast and repetitive lifting is required within a limited workspace.
Wall Travelling Jib Crane
Wall travelling jib cranes are installed on rails mounted along a building wall, allowing the boom to travel horizontally while operating as a cantilever crane. This system is particularly suitable for production lines with fixed and sequential workflows. It also complements overhead cranes by providing dedicated lifting coverage for individual workstations without interfering with the main crane operation.
Underhung Crane
Underhung cranes are suspended from the building's roof structure, allowing the bridge girder to travel beneath overhead runway beams. This configuration is especially beneficial where floor space is limited or structural layouts restrict the installation of conventional overhead cranes. Designed for light to medium-duty lifting applications, underhung cranes require proper structural engineering to ensure safe, reliable, and efficient operation.
Monorail Crane
Monorail cranes operate along a single fixed rail, providing straightforward and efficient material transport between designated points. Unlike overhead cranes, movement is limited to the direction of the rail, making them ideal for repetitive production processes. The rail system can be suspended from the building structure or supported by additional steel framing and may be designed with curves, loops, or branching tracks to suit specific operational requirements.
Cargo Lift
Cargo Lift is a vertical lifting system designed to transport goods and materials between different floors. It is commonly used in factories, warehouses, distribution centers, commercial facilities, and industrial environments to improve the efficiency of material handling operations. Cargo lifts can be customized according to the required lifting capacity, lifting height, platform dimensions, and specific operational requirements.
Hoist
Nippon Hoist
- Type: Electric Wire Rope Hoist
- Capacity: 1–200 Tons
- Configuration: Standard Headroom, Low Headroom, Double Rail
- Trolley Options: Motorized Trolley, Hand Push Trolley, Lug Suspended (Fixed Position), Hand Geared Trolley
- Standard Lifting Heights: 6 m, 8 m, 12 m
- Hoisting Speed: Single Speed or Dual Speed with Inverter
- Hoisting Motor Duty: 40% ED, up to 240 starts/hour
- Cross Travel Speed: Single Speed or Dual Speed with Inverter
- Cross Travel Motor: Class F Insulation, 25% ED
- Power Supply:
3-Phase 200 V, 50/60 Hz
3-Phase 220 V, 60 Hz
3-Phase 380 V, 50 Hz
3-Phase 400 V, 50 Hz
3-Phase 440 V, 60 Hz
3-Phase 480 V, 60 Hz
Hitachi Hoist
- Capacity: 0.25–30 Tons (Higher capacities available upon request)
- Available Types:
Electric Wire Rope Hoist
Inverter Wire Rope Hoist
Electric Chain Hoist
- Configuration: Standard Headroom, Low Headroom, Double Rail
- Trolley Options: Manual, Chain Driven, Motorized
- Duty Rating: 40% ED, 400 starts/hour
- Hoisting Speed:
Single Speed, Dual Speed, Creep Speed, Dual-speed models available with or without inverter
- Cross Travel Speed:
Single Speed, Dual Speed, Creep Speed
- Control Voltage: 24 V / 200 VAC
- Power Supply:
3-Phase 200 V, 50/60 Hz
220 V, 60 Hz
380–400 V, 50 Hz
415 V, 50 Hz
440–460 V, 60 Hz
GH Hoist
- Type: Electric Wire Rope Hoist
- Capacity:
Standard Hoist: 1–20 Tons
Open Winch: 6.3–400 Tons
- Lifting Height: 4–40 m
- Trolley: Motorized Trolley
Available Configurations:
Single Girder, Double Girder, Double Girder with End Carriage
- Motion Control: Frequency Inverter for Hoisting and Cross Travel (Standard)
- Hoist Classification: Minimum ISO M5
- Wire Rope Safety Factor: Minimum 5
- Hoisting Motor Duty: 60% ED
- Protection Rating: IP55
- Modular Design: Supports multiple reeving systems (2/1, 4/1, 4/2, etc.), compatible with various girder sizes, and allows tandem hoist configuration.
- Safety Features:
Double-stage lifting limit switch, Load swing control, Phase loss protection, Motor overheating protection, Overload limiter
Worldhoist
- Type: Electric Wire Rope Hoist
- Capacity:
Single Girder: 0.8–32 Tons
Double Girder: 0.8–80 Tons
- Maximum Lifting Height:
Single Girder: 60 m
Double Girder: 90 m
- Hoist Classification: M3–M7
- Duty Rating: 60% ED
- Protection Rating: IP55, Class H Insulation
- Safety Features:
Four-stage adjustable lifting limit switch
Motor overheating protection
- Overload protection
- Optional Feature: Explosion Proof Hoist (Standard Classification: Ex d IIB T4)
Accessories
JEICO Industrial Radio Remote Control
JEICO is a leading manufacturer of industrial radio remote control systems from South Korea, trusted across a wide range of material handling and industrial automation applications. Its products are widely used for overhead cranes, hoists, winches, transfer trolleys, special-purpose vehicles, and automated machinery.
Designed with safety, reliability, and operator convenience in mind, JEICO remote controls are available in configurations ranging from 3 to 14 push buttons, with both single-speed and dual-speed operation to suit different lifting requirements.
- Key Features
Available in 3 to 14-button configurations
- Single-speed and dual-speed control options
- Emergency Stop (E-Stop)
- Safe Start-Up Protection
- One-Touch Sync Pairing
- IP55 Protection Rating
- Explosion-proof models available for hazardous environments
Lifting Equipment
Lifting Equipment refers to various types of equipment designed to support load lifting operations using hoists and cranes. These equipment help improve the effectiveness, efficiency, and safety of lifting operations.
The lifting equipment we provide includes:
Product Range :
- Steel Plate Clamps
- Concrete Product Clamps
- Special Purpose Clamps
- Shackles
- Lifting Hooks
- Pallet Hangers
- Lifting Beams
- Crane Scales
Safety Light Crane
Safety Light Crane is a warning light system installed on cranes to enhance safety in operational areas. The light projects a line or beam as a visual indicator of hazardous areas, helping personnel identify the crane’s operating zone and potential hazards.